High-quality steel liquefaction technology from fine slag materials

Authors

  • Bekchanova Valida PhD researcher, Tashkent state technical university, University Street2,Tashkent,Uzbekistan
  • Chorshanbiyeva Lobar PhD researcher, Tashkent state technical university, University Street2,Tashkent,Uzbekistan
  • Gulyamov Saidsulton Researcher, Tashkent state technical university, University Street2,Tashkent,Uzbekistan
  • Urinboyev Umidjon Researcher, Tashkent state technical university, University Street2,Tashkent,Uzbekistan
  • Eshimov Doston Researcher, Tashkent state technical university, University Street2,Tashkent,Uzbekistan

Keywords:

steel, alloy, slag, electric arc furnace

Abstract

We can say that high-quality steel alloy is being liquefied in an electric arc furnace, first of all, the chemical composition of low-carbon steel alloy has been developed, and solidified steel has been obtained. Then, in the process of fluidization, it was possible to obtain high-quality steel zagatovka by introducing different types of flux into the alloy. The heat provided for the main fluidization of the furnace can cause a large amount of burn from fine solids when the furnace electrodes are lowered. For this reason, the order of loading the slag into the furnace was developed, and it was achieved to reduce the amount of slag burning

Downloads

Published

2023-05-20

How to Cite

Bekchanova Valida, Chorshanbiyeva Lobar, Gulyamov Saidsulton, Urinboyev Umidjon, & Eshimov Doston. (2023). High-quality steel liquefaction technology from fine slag materials. Zeta Repository, 18, 55–58. Retrieved from https://zetarepo.com/index.php/zr/article/view/2246

Issue

Vol. 18 (2023): EJET

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.